Excellent running properties Has 3 catching functions: Catching function: In case of vertical fall the 1. Catching function responds Catching function: In case of falling backwards (fall-back and sitback) the device catches due to an automatic draught limiter Catching function: A centrifugal brake releases a braking impulse at high speed and brings catching function 1 into action Approved for persons from 40 kg to 150 kg The value of 5 kN is 17 % below the maximum impact force with a 100 kg steel dummy, claimed in EN 353-1. Extreme safety is provided as the guided type fall arrester can be used right after a fall. Consequently a second fall is also safe. The snap-hook has a swivel. The new karabiner installed since the end of 2016 has a weight saving of ~ 10 % and has a larger opening. Details Very smooth-running, hence no exhaustion and only low level of strain when climbing Very good running properties due to roll guides at each side and long axis distance Contact to the guiding rail via ball-bearing rolls Correct insertion into the fall arrest rail is compulsory and therefore guaranteed Arms and legs are relieved when climbing Can be used up to 15° layback and 20° lateral position Can additionally be used for horizontal fall arrest rails Application Can be used on all kind of HACA fall protection profiles For radius min. 750 mm Material: Aluminium, stainless steel Certification(s): CE certified as climbing protection according to DIN EN 353-1: 2018, also tested according to ANSI/ASSE 2359.1-2007 and CSA Z259.2.4-15.